Connect the adapter

Choosing the connection type your phone supports, pairing the adapter and turning on the automatic start when the car turns on.

The Connection screen opens from the connectivity card on the home screen, or from the Connection row in Settings. This is where the adapter is found, paired and saved.

When you open the screen with no active connection, the app starts scanning on its own.

The screen has two tabs. Connection finds, pairs and saves the adapter. Auto start gathers what makes the app start and reconnect on its own, in three cards: Automatic start, Battery (Android only) and Reconnection.

  1. Choose the connection type

    The tabs show the connection types your phone supports. On Android there are four: Bluetooth, BLE 4.0+, Wi-Fi and USB. On iPhone there are three: BLE 4.0+, MFi and Wi-Fi.

    On iPhone, classic Bluetooth only works with the adapters certified by Apple (MFi) and supported by the app: OBDLink MX+, vLinker FS and vLinker MS, on the MFi tab. Other classic Bluetooth adapters, the ones that ask for a PIN such as 1234, do not work with an iPhone. This is a limitation of iOS, not of the app.

  2. Authorize Bluetooth

    On the first tap on refresh, the app explains why it needs Bluetooth and only then opens the system request. Tap Allow on both screens.

    On the USB and MFi tabs the app does not request Bluetooth: USB does not depend on it, and on iPhone MFi adapters are paired by the system itself.

  3. Scan and connect

    Tap the refresh icon to the right of the list. The scan takes about twelve seconds on Bluetooth and on BLE. Devices already paired come first, marked Paired, and new ones show up as Not paired as they are found.

    Tap the adapter you want. On classic Bluetooth, if it is not paired yet, the app pairs it there and then and waits up to thirty seconds. The default PIN is usually 1234 or 0000.

  4. On iPhone, pair the MFi adapter

    The MFi tab lists the MFi adapters already connected to the iPhone, marked Connected to iPhone. Tap the adapter to connect. The line at the top of the tab shows which models work.

    The first time, with the ignition on, press the adapter's pairing button (on the OBDLink MX+, the Connect button) and tap Find adapter. The iPhone shows the adapters nearby: tap yours, and the app connects right after. You can also pair in Settings, Bluetooth, and come back to the app.

  5. Accept the requests that come after connecting

    Once the connection is established, the app requests what starts to make sense at that point: location, with the Allow all the time and While using options, and notifications.

    Choose Allow all the time. That option keeps the trip recording going with the screen off and saves where the car was parked.

  6. On Wi-Fi, connect through the phone first

    The Wi-Fi tab shows no device list. Join the adapter's network from the phone's Wi-Fi settings first. On Android there is a button that opens that screen directly; on iPhone the path is Settings, Wi-Fi and the adapter's network.

    Back in the app, check the IP Address and the Port and tap Connect. The fields carry examples, such as 192.168.0.10 and port 35000, and the app tries the most common addresses on its own, filling the field in when it finds the right one.

    The tab itself warns about the limitations of this kind of adapter: it does not allow automatic connection, and the phone may treat the adapter's network as having no internet access and block mobile data while connected to it.

  7. On USB, use an OTG cable

    Plug the adapter into the OBD port and connect the cable to the phone through an OTG adapter, which is essential on phones with USB-C.

    Baud rate stays on Auto, which tries the common speeds and remembers the one that works. The Advanced section, with VID (hex), PID (hex) and Driver, is only needed when the adapter is not detected; leave the fields blank for automatic detection.

    When Android asks which app to open, select the option to use it by default: that is what makes the app open on its own the next time the cable is connected. With a cable the phone powers the adapter and does not charge; on long trips, use a powered Y cable plugged into a 12 V socket.

  8. Use the Auto start tab

    Auto-reconnect to adapter, Restore lost connection, the battery optimization and the link with the car's Bluetooth apply as soon as you change them. The other options on the tab take effect only after you tap Save, at the bottom of the screen.

    The Reconnection card gathers the attempts to reconnect to the car. The connection sound and the “driving” mode option are in Settings > Notifications. The options that start the app on its own sit on the Automatic start card.

  9. Turn on the automatic start when you get in the car

    A feature available on Android only, from version 8 onwards. On the Start the app when the car turns on card, tap Select your car's Bluetooth and choose your vehicle's stereo from the list.

    The list carries only audio devices already paired with the phone. If your car is not there, pair the phone with it in the Android Bluetooth settings and come back to this screen.

    The app marks this feature as Experimental. If it does not work on your car, create a routine on the phone itself to open the app when the vehicle's Bluetooth connects.

  10. On the iPhone, choose what starts the app

    On the Automatic start card, two options start the app on its own, both on out of the box:

    • Start from the adapter starts the app in the background and connects automatically when the adapter is in range (BLE and MFi adapters).
    • Start when leaving the parking spot connects when you leave the place where the car was parked. It needs location allowed Always.

    When you start driving asks whether you want to record a trip when the phone works out that you have started driving. It works without an OBD adapter. It is in Settings > Notifications.

    Opening the app always reconnects, even with these options off.

  11. Check what was saved

    The card at the top starts showing Saved OBD-II adapter with the device name. Auto-reconnect to adapter comes switched on, and it is what connects the app from then on.

    On Android, also turn on Disable battery optimization. Without that exemption the system can end the recording in the background.

  12. Set up background reconnection

    Background reconnect sets what happens when the system wakes the app near the car: only the adapter is tried, and the GPS and the sensors start only after the ECU answers. Retry interval and Retry window control the pace and the length of those attempts.

    Only when close to the car ignores the wake-up while the adapter signal is weak, which saves battery at home, and Minimum signal sets the threshold. The option can miss a trip when the adapter sits far from the phone.

    Vehicle connection attempts sets how many times the adapter tries to reconnect to the ECU, roughly every ten seconds, before giving up and letting the app sleep to save battery.


← All guidesIn the FAQ: Adapters and connection →