The Diagnostics screen is where you find out why the check engine light came on.
There are three sections:
- Read errors: runs a full diagnosis of the vehicle, at 3 depth levels.
- Clear Errors: erases the fault codes, at 3 depth levels.
- History: a complete record of every read and clear ever done on the vehicle.
Get the car ready
Park and leave the key on with the engine off. The app refuses to start the scan with the vehicle moving, for safety and because the answers are more reliable with the car stationary.
Choose the scan mode
Tap Diagnose my car and choose between Basic, Advanced and Professional. Basic reads, through the general OBD-II address, what the standard defines, and serves most cases. Advanced queries every known module of the car, one by one. Professional lists the modules so you pick which ones to read, shows the information of each module and can search for modules outside the list. On older Volkswagen group vehicles, Advanced and Professional also read the modules that use VW TP 2.0. On K-Line and J1850 vehicles, Find modules checks the addresses from 00 to 32, and Search every address, 00 to FF (255 addresses) widens the search, which then takes longer.
The same sheet shows the OBD profile for diagnostics, with the Suggested tag on the profile matching your car; Change profile lets you choose another one by generation and engine. The sheet also reminds you to park safely and to keep the key on with the engine off, and warns that some vehicles return fewer results on the deeper scans, because of manufacturer restrictions.
On the free plan, Advanced and Professional play a short video before running; on some makes the app also asks you to confirm a warning. Include sensitive modules adds modules such as the airbag and allows the module search; it asks for confirmation every time and is unticked after each scan. If a mode shows as Feature unavailable for your vehicle, it depends on your car's communication protocol or on commands not mapped in the database yet; Request inclusion registers the request, and Basic still covers the standard codes.
Read the result
The codes appear split into Pending Faults, Confirmed Faults and Permanent Faults, or the screen says No faults detected. Each fault shows its description and three buttons: obd-codes.com, shown only for the codes that site covers, Search and Details.
Details, or a tap on the code, opens a sheet with the description highlighted and the explanation in Details, Symptoms, Cause and Solution, along with the Snapshot button, which opens the freeze frame of that error, on the codes that have one. The description of the codes is always in English, as set out in SAE J2012.
When a module reports the status of a code, the code shows it in words, such as Test failed or Warning lamp requested. Show history codes, on by default, shows or hides the codes of faults that are not present right now, and, on a Professional result, Show codes related to incomplete tests adds the Codes related to incomplete tests section, with codes whose tests have not finished and no failure recorded; these are not saved to the history. Each filter only appears when the result has codes it applies to, and the app remembers your choice. Export result shares the result as text. On Volkswagen group vehicles, a module's code is the number of the event that module recorded, with the SAE code and the description next to it when the app finds them. For manufacturer codes, Search adds the car's make to the search.
On an Advanced or Professional result the codes are grouped by module, and each module has Clear, which clears that module only. The Snapshot button, inside Details, appears on the codes those modes read. If something looks wrong, Report a problem with this diagnosis sends support the exchange with the car, so the case can be reproduced.
Understand what the code points to
A code names the symptom the ECU observed, not the part to replace. P0420, for instance, means catalyst efficiency is below the threshold, a result that can come from a worn catalyst just as much as from a faulty oxygen sensor fitted ahead of a healthy one.
Before buying parts, open the Snapshot: the conditions recorded at the moment of the fault say more than the code on its own.
Clear the light, when that is appropriate
On the Clear Errors tab, read the Precautions and follow the Steps to clear: park safely, wait for the connection with the ECU, tap Clear Errors, turn the car off and on again to check whether the light went out, and see a professional to deal with the cause. The app says Clear completed or Clear not completed at the end.
Tapping Clear Errors lets you choose the clear mode, which starts on the mode of your last scan. Scanning and clearing use different commands in each mode, so the choice is yours. Basic cleanup clears through the general OBD-II address, Advanced cleanup clears every module of the car at once, and Professional cleanup opens the module list so you pick which ones to clear. When the result has codes read through the general OBD-II address, Professional cleanup also sends the general clear, first, because it is the one that erases those codes. A module's Clear does the same when that module's codes were read that way. Include sensitive modules is also offered in this choice, separately from the scan.
On some makes, the Instructions shown before an Advanced or Professional clear, and before a module's Clear, offer an extra option. It starts unticked and asks you to confirm the risk when ticked. Restart modules after clear, on Volkswagen group vehicles, restarts the engine and transmission modules the same way as turning the key off and on, and is only sent with the car stopped and the engine off. Write clear date to module, on Peugeot, Citroën and DS, writes the date of the clear into each module cleared; the module may refuse it, and the app cannot remove the date afterwards. The clear does not depend on either option.
Clearing the code does not fix the defect: if the cause is still there, the code comes back. Clearing also resets the emission monitors, which need several days of mixed driving to complete again.
Browse the history
The History tab keeps every Read and every Clear, with the date and the result, Success or failure. Tap a row to reopen that result, or swipe left to delete the record.
- Read errors tab
- Runs the scan and shows the codes found.
- Clear Errors tab
- Erases the stored codes and turns the dashboard light off.
- History tab
- Every read and every clear, with the date. Tapping a row reopens that result.
- Basic
- Reads and clears, through the general OBD-II address, what the standard defines. Fast, and enough for most cases.
- Advanced
- Queries every known module of the car, one by one. Takes longer and, on some makes, shows a warning before running.
- Professional
- Lists the car's modules to read or clear only the ones you pick, with the information of each module and the search for modules outside the list.
- Pending / Confirmed / Permanent Faults
- Pending was recorded once; confirmed repeated; permanent is only removed after the ECU verifies that the defect has stopped occurring.
- Show history codes and Show codes related to incomplete tests
- Filters of the result, shown only when the result has codes they apply to. Show codes related to incomplete tests appears only on a Professional result. Codes related to incomplete tests have no failure recorded and are not saved to the history.
- Export result
- The download icon beside the vehicle picker, on the Read tab. Shares the result as text through the phone's share options. Requires a paid plan.
- Details, Symptoms, Cause and Solution
- The four sections of a code's detail. The code text follows SAE J2012, in English.
- Snapshot
- Opens the freeze frame of that code, with the conditions at the moment it was recorded. On modules that keep them, such as those of the Volkswagen group, Renault and Lada, it also shows the code's extended data, such as the odometer and counters. It is in the Details sheet of the code. Values are named with the sensors of the car's own module; one the app cannot identify is shown as such, never guessed, and every record ends with its raw data, which you can copy.
- obd-codes.com and Search
- External references about the code.
- OBD profile for diagnostics
- On the scan sheet. It shows the profile used for the diagnosis, with the Suggested tag on the one matching your car, and lets you change it by generation and engine. The clear uses the same profile, without letting you change it there.
- Report a problem with this diagnosis
- Sends support the exchange of that diagnosis with the car, so the case can be reproduced and fixed.