Smart Driving

The two driving scores, what affects each one and the detailed report of the period.

Smart Driving analyzes how you drive in two areas: defensive driving, measured by the Safe Score, and economical driving, measured by the Eco Score.
During the trip, the score is calculated in real time from several events detailed further down. At the end, each trip goes into the history, where you follow the scores and the detailed metrics of a single trip or of a whole period.

  1. Read the two scores

    At the top sit Safe Score and Eco Score, side by side, each one with a one-line reading that runs from "Flawless driving, well done!" to "Ease off on hard acceleration and braking".

    The two scores measure different things. The Safe Score looks at how you accelerate, brake, take turns and keep to your limit, together with night driving, events in quick succession and phone use. The Eco Score looks at how efficiently you drive: coasting, idling, engine speed, steady speed and consumption. Every event counts at its level: low, normal or hard.

  2. Choose the period

    The month picker changes everything below it, and the Day / Month toggle switches the report between the daily and the monthly view. The Average considers the trips of the chosen period rather than the whole history, which lets you compare one month with another.

  3. See what affected the score

    In Period metrics, the safety part gathers Distance traveled, Driving time, Average speed, Maximum speed, Avg. RPM, Maximum RPM, Speeding, Acceleration, Braking, Sharp cornering, Sequential events, Phone usage and Night driving, from 10 pm to 5 am. Acceleration, braking and cornering show the total and, below it, how many were hard, normal and low.

    The efficiency part gathers Idle time, Idle occurrences, Idle stops, fuel burned while idling, Coasting time, High RPM time, High speed time, Time over the limit, Speed variation, Acceleration, braking and speeding, Avg speed, Average consumption, Total fuel used and CO₂ emissions.

    Under a line that changed the score you see its points, such as −8 pts or +2 pts: what that line took from the score or gave it. Together they add up to the difference between 100 and the score. A trip scored before this way of counting shows no points.

  4. How the points are counted

    A trip needs at least 3 minutes and 200 meters to get a score, and a score stays between 30 and 100. The first four lines of the Safe Score take points straight from 100; the other lines change the score by a percentage.

    Your limit is the Overspeed threshold set in Trips, 120 km/h by default.

    Safe Score

    LineWhat it measuresEffect
    AccelerationSpeed gained in one second, at three levels. A long pull is one eventup to −8 pts
    BrakingSpeed lost in one second, at three levelsup to −14 pts
    SpeedingStarts after 3 seconds at 5 km/h over your limit and ends at 5 km/h under it. Normal from 15 over, hard from 30 overup to −8 pts
    Sharp corneringTurns measured by the phone's motion sensorup to −10 pts
    Average speedThe trip's average moving speed−20% to +5%
    Driving timeMore than 55 minutes in one tripup to −15%
    Night drivingShare of the trip between 10 pm and 5 amup to −10%
    Sequential eventsAn event followed by another within 30 seconds or 5 minutesup to −15%
    Phone usageEach use while moving, 4% eachup to −20%

    Eco Score, only for trips with the car's data through the OBD adapter

    LineWhat it measuresEffect
    Coasting timeSlowing down with your foot off the pedal, between 1200 and 2400 rpm, at 40 km/h or moreadds points
    Idle timeEngine running with the car stopped. On a hybrid or a car with start-stop, every stop countstakes points
    High RPM timeTime above 3500 rpmtakes points
    Speed variationHow much the speed swings from one second to the nextdown to the score of 30
    Acceleration, braking and speedingThe same events as the Safe Scoreup to −40%
    Avg speedBest around 60 km/h−19% to +6%
    Average consumptionYour km/L against a reference range for the engine size and the fuel−1.5% to +3.5%
    Time over the limitShare of the trip spent speedingup to −20%
  5. Open the detailed report

    Comprehensive report opens the analysis of the whole period on the same screen used for the detail of a single trip, with the safety and efficiency metrics separated by tab.

    Sharp cornering, sequential events and stops are presented by intensity rather than by total alone: three hard brakes in a row carry a different weight from three spread across the month.

  6. Look trip by trip

    The list below carries each trip with its score. Tap one of them to open the detail. Load More brings the rest of the period.


← All guidesIn the FAQ: Trips and driving →