Acceleration and braking tests

Measuring a launch, braking time and braking distance, and comparing the results over time.

The Acceleration screen times launches and stops using the speed read directly from the car.

There are three main options:
Acceleration, which measures times such as 0-100 km/h or 0-60 mph and includes the quarter mile (0 to 402 meters);
Braking, which times how long it takes to stop;
Brake Dist., which calculates the distance covered while braking.

Only run the tests on private ground, closed to traffic and clear of obstacles.

  1. Create a test

    Tap Add. In Choose test type, select what will be measured. The tab you are on sets the test family, and inside it you choose the ranges, such as 0 to 100 or the quarter mile.

  2. Let the app calibrate

    With the car fully stopped, the app calibrates the phone's orientation and shows Calibrating orientation. That calibration is what lets it tell forward acceleration apart from lateral acceleration.

    If the car moves during the process the calibration fails and the app asks you to repeat it.

  3. Take the measurement

    Tap Start Test. The first time, the Ready to start screen sums the procedure up: keep the car fully stopped, accelerate and the timer of each range starts and stops on its own; on braking tests, reach the starting speed and brake firmly. Confirm with Got it.

    The timer of each range fires automatically as the speed rises, with no tap needed during the launch. Stop Test ends the measurement at any point.

  4. Read the result

    Tap a measurement in the list to open the Test details. Besides the time, the screen shows the Peak acceleration, the Peak lateral and the chart of the launch.

    A measurement with the GPS tag was taken without an adapter and is less precise.

  5. Follow braking over the months

    The Braking and Brake Dist. tabs are the most useful ones in everyday use. Repeat the measurement on the same stretch, from the same starting speed, once a month.

    A braking distance that grows over time can point to pad or tire wear, and the number changes before the difference can be felt through the pedal.


← All guidesIn the FAQ: Trips and driving →