The Corrections screen brings what the app calculates in line with the car and the pump. At the top, choose the car: the fuel card (with the ethanol in the fuel and the consumption correction), Speed and Odometer belong to each car. An electric car shows only speed and odometer.
Under For all cars come the Acceleration tests, which apply to every car.
The Performance settings, a separate row in Settings, are also described in this guide. The tire limits are in the TPMS settings, described in Tire pressure.
The fuel card starts with Consumption calculation: where this car's consumption comes from.
Choose how the consumption is calculated
Consumption calculation sets where this car's consumption comes from. Car's fuel rate is the default when the car reports its own fuel flow; otherwise Automatic picks the best calculation the car allows and, once there are full tanks driven with the adapter, the one closest to the pump.
Tap the field to see every calculation with the average of the last trips under it, in your unit, to compare with the car's display. A calculation the car cannot run is dimmed, with the reason: a sensor the car does not report, or the engine displacement missing from the vehicle. The calculations from the injection also use the engine's Cylinders and the Injector flow, which appear on the card while one of them is in use. The choice applies to the next trips, and the Consumption correction works on top of it.
Correct the fuel consumption
When the car does not report its own fuel flow, the app estimates the consumption from the air the engine takes in, and that estimate depends on the fuel. Ethanol in the fuel shows what the app assumes: the regular gasoline of your country or, on a flex car, the mix of the last fill-ups. Choose Manual if you know the share. The option does not appear when the car reports the ethanol itself.
Consumption correction compares the full tanks with the trips recorded with the adapter connected. In Automatic it starts after two full tanks that agree, driven with most of the distance recorded, and keeps following the latest ones. In Manual, +10% means the car uses 10% more fuel than the app calculates. The correction applies from that moment on: consumption, range, next fill-up forecast, trip cost and Home Assistant change together, and past trips stay as they were.
Ethanol in each country's gasoline
When the car does not report its ethanol, the app assumes the share of ethanol in the best-selling gasoline of your phone's region, from each country's regulator or official sales figures:
- Brazil: 30% (premium gasoline 25%)
- India: 20%
- Argentina: 12%
- United States, United Kingdom, France, Netherlands, Denmark, Colombia and Philippines: 10% (UK super grade 5%)
- Peru: 7.8%
- Germany: 5%
In any other country the app assumes gasoline without ethanol. If the gasoline where you fill up carries ethanol, set the share in Ethanol in the fuel, under Manual. A flex car uses the mix of its own fill-ups, and a car that reports its ethanol always uses that value.
Correct the speed
Speed correction makes up for the difference between the speed read over OBD and the one shown on the car's dashboard. The correction is applied to the reading, so every screen and feature that uses speed reflects it automatically. Each car has its own correction, the one of the car chosen at the top.
Correct the odometer
Odometer correction makes up for the difference between the odometer the car reports over OBD and the one on the dashboard. Choose Add or Subtract and enter the difference in your unit, km or miles. The correction is applied to the reading, so the vehicle card, the live data, Home Assistant and MQTT all show the corrected value.
It applies to the odometer sensor the car answers over OBD, never to the estimate or to a reading you typed. To change it, pick the odometer sensor in Main sensors; on automatic or on the estimate, the card shows the value without letting you change it.
Adjust the vibration tolerance
Vibration tolerance, with the Low, Medium and High options, is used by the acceleration tests and sets how much vibration from inside the car is tolerated during the calibration. High tolerates more vibration.
Tune the performance
Live Data Chart Refresh Interval sets how often the Individual and Integrated tabs are redrawn; higher values keep scrolling lighter in the rest of the app. Panel Refresh Interval does the same for the Panel: lower values make the animation smoother, and higher ones cut processor use.
Priority sensor reading sets the reading rate of the priority sensors, which can be read several times a second. Zero keeps the reading continuous, and speed and RPM stay continuous at any value. ECU tolerance before reconnecting sets how many standard sensors may fail in a row before the app checks whether the ECU is still answering; higher values are more forgiving with slow adapters.
- Consumption calculation
- The car's fuel rate, automatic, or one calculation: injected quantity, air flow, absolute load, manifold pressure by RPM or by load, injection time. Each shows the last trips under it.
- Cylinders and injector flow
- Used by the calculations from the injection. 4 cylinders and 250 cc/min until you change them.
- Ethanol in the fuel
- What the consumption estimate assumes when the car does not report it: your country's regular gasoline, the mix of a flex car's fill-ups, or the share you set.
- Consumption correction
- Automatic from the full tanks driven with the adapter, manual from -30% to +30%, or off. It applies from the moment it changes.
- Speed correction
- Makes up for the difference between the OBD speed and the dashboard one. Applied to the reading, it holds for every screen. One per car.
- Odometer correction
- Difference in km or miles added to or subtracted from the odometer the car reports over OBD. Editable with an OBD sensor picked in Main sensors.
- Vibration tolerance
- Low, Medium or High. How much vibration is tolerated in the calibration of the acceleration tests.
- Live Data Chart Refresh Interval
- How often the Individual and Integrated tabs are redrawn.
- Panel Refresh Interval
- How often the Panel updates. Lower is smoother; higher uses less processor.
- Priority sensor reading
- The reading rate of the priority sensors. Zero keeps the reading continuous; speed and RPM stay continuous.
- ECU tolerance before reconnecting
- How many standard sensors may fail in a row before the app checks the ECU.