Live Data shows the readings arriving from the ECU while you drive. The screen only opens with the adapter connected and the ECU answering.
There are three layout tabs: List, Individual and Integrated.
Connect first
The screen depends on the ECU answering. With no connection the app says so and does not open, because there would be no reading to show.
Choose the layout
List shows every reading as text, and is the best one for going through many sensors at once. Individual shows one sensor at a time, in large type. Integrated gathers several into a single frame.
Group them the way you need
In Group sensors, choose By category to gather the readings by subject, such as engine, fuel and temperature, or By profile to separate them by the profile each one came from.
Grouping by profile makes it easy to spot what came from the manufacturer's advanced profile, which appears with the Advanced tag.
Choose what appears
On the Individual and Integrated tabs, set which sensors take each position and confirm with Save Settings.
Shorten the list, if it is slow
Every active sensor is one more question on the same bus. If the readings are slow to change, turn off individual sensors on the Supported sensors screen, where every reading has a switch of its own, and turn off the user profiles you are not following in Sensor Profiles.
- List tab
- Every sensor as text. The best layout for going through many readings at once.
- Individual tab
- One sensor at a time, in large type.
- Integrated tab
- Several sensors in a single frame.
- Group sensors
- By category gathers the readings by subject. By profile separates them by where each sensor came from.
- Advanced tag
- Marks the sensors that came from the manufacturer's advanced profile rather than from the standard set.
- Save Settings
- Stores the sensor choice of the Individual and Integrated tabs.