The Trips screen lists all your trips.
With the adapter connected, trips are recorded automatically. Without it, you can start recording manually or, if you forgot, add the trip later with the basic details.
The trip in progress takes a card at the top of the screen, above the filters, and only shows while the trip is under way.
On an electric or plug-in hybrid vehicle each trip also records the energy the battery delivered, net of what regeneration recovered. Consumption is shown in km/kWh (or mi/kWh) and the cost uses the price of your last recharge; a plug-in hybrid trip adds fuel and energy.
The consumption of each trip comes from the car when it reports its fuel flow; otherwise the app estimates it from the air the engine takes in. Registering full-tank fill-ups calibrates that estimate: see Refueling and Corrections.
Read a row of the list
Each card carries the date, the start and end times, and four numbers: Distance, Duration, Average speed and Average consumption.
The tags show where the record came from: GPS for trips recorded without an adapter and Manual for the ones you entered. With more than one car and the filter on All, the model tag appears as well.
A tilde before the value means the consumption is estimated. A dash means there was not enough data to calculate it.
Open a trip
Tap the card to open the Trip Map, with the route drawn, the summary of distance, duration, average speed and consumption, the Moving time compared with the Idle time, and the start and end addresses.
Edit lets you write a description for the trip and switch the Trip purpose between personal and work. When there are Dashcam videos, the thumbnail in the corner of the map opens the video, or the list when there is more than one, which shows Unavailable when the file was deleted from the gallery.
While the trip is still in progress, the screen shows the matching notice and the map is only drawn at the end.
Split a trip
If two trips were recorded as one, open the trip and tap the scissors, next to Driving data. When it had a stop of more than 5 min, the summary already suggests splitting there.
Drag the bar: the scissors move along the route and the preview shows the distance, duration and consumption of each part. The bar snaps to the stops, and the arrows jump from one stop to the next.
At a stop, the stopped time stays out of both trips. Distance, consumption, Safe Score and Eco Score of each part are recalculated, and the split cannot be undone.
Play the trip back with the sensors
When there are recorded readings, the Driving data button opens the playback: the chart of the readings along the route and the Sensor summary, with the minimum, average and maximum of each one.
The chart shows the trip's sensors: the Default sensors of Trips when the trip started, up to two on the free plan and up to six on Pro. On Pro, tap Select sensors to change them or add others, up to six.
A sensor that is not in the trip's list can be added only if it was read during the trip, up to 48 hours after it. It is then copied into the trip and stays there. After that, the app says Expired sensor. To have a sensor in every trip, add it to the Default sensors before driving.
Delete a trip
Swipe the card to the left. Deletion is triggered as soon as the swipe passes the threshold, with no second tap needed.
The app asks for confirmation before deleting. Once confirmed, the action cannot be undone.
Record a trip without an adapter
Open the floating button and tap Start trip. The app starts recording by GPS, and the floating button itself turns into a red End trip button, so you can finish with a single tap.
The option is unavailable with the adapter connected, because recording is already automatic in that case.
The same red button shows during any trip, including the ones the adapter records on its own. Tapping it ends the trip right away, even with the engine running, and the next drive starts a new trip.
Enter a trip that already happened
On the floating button, choose Register trip manually. The form asks for purpose, vehicle, origin, start date and time, starting odometer, destination, end date and time, ending odometer and an optional description.
Origin and destination have a map button beside them, so you can drop the point instead of typing the address. The distance is calculated as the two odometer values are filled in.
The ending odometer has to be greater than the starting one, and the end date has to be later than the start. The app points at the field that is wrong and takes the cursor to it.
Merge trips that were split
One trip can be recorded as two, because of a long stop or because the app concluded the journey had ended. On the floating button, tap Merge trips.
The first time, the How to merge trips screen explains the procedure: tap the trips you want to join and then the save button. The selected trips get a blue border.
Two rules apply: the trips have to belong to the same vehicle, and the gap between the end of one and the start of the next cannot exceed 2 hours.
After the confirmation, the original trips are replaced by a single one, with the distances and the fuel added up. The action cannot be undone.
Filter and sort
Below the header sit the per-vehicle filter, present only with more than one car registered, and the month picker.
The icon to the right of the month picker opens Sort Trips, with the newest, oldest, longest distance and longest duration options.
Save favorite places
On the floating button, Favorite places opens the list of the places you marked. In New favorite place, enter the Description, such as Home or Work, type the Address to search, tap the map to adjust the point and set the Radius.
When a trip starts or ends within the radius of a favorite place and you wrote no description, the app describes the trip automatically with the names of the places. A description you typed always wins.
- Sort, to the right of the month picker
- Opens the sorting sheet: newest, oldest, longest distance, longest duration.
- Per-vehicle filter
- Present only with more than one car. All considers only the active ones. An archived car appears in the list dimmed and, selected by name, shows its trips.
- Month picker
- A grid of months built from the trips that exist, from the most recent to the oldest.
- Trip in progress
- Card shown above the filters while a trip is being recorded. Tapping it opens its map.
- Edit, on the trip detail
- Lets you write the description and switch the purpose between personal and work.
- Driving data
- On the trip detail. Opens the playback with the sensor chart and the summary of minimum, average and maximum.
- Swipe the card to the left
- Deletes the trip. The swipe triggers the action, with no second tap, and the app confirms before deleting.
- Start trip
- On the floating button. Records by GPS, without an adapter. Unavailable while an OBD connection is active.
- Register trip manually
- On the floating button. A full form to enter a trip that already happened.
- Merge trips
- On the floating button. Enters selection mode. Requires the same vehicle and a maximum gap of 2 hours between the trips.
- Favorite places
- On the floating button. Places with a description, an address and a radius. They let the app describe trips automatically when they start or end at one of them.
- Save button in merge mode
- Takes the place of the floating button during the selection. It is gray, with an X, while fewer than two trips are selected, and blue when the merge is possible.