Main sensors

Choosing where the app reads fuel level, odometer, speed, engine RPM, ethanol, fuel rate, range and the electric inputs from when the car does not answer the standard sensor.

Some cars do not respond to the standard fuel level, odometer, ethanol, fuel flow or speed sensors, but expose the same value through a manufacturer-specific sensor.
You can get the manufacturer's advanced sensors through the profiles in Sensor Profiles, by installing an advanced profile or by running Discover advanced sensors.
The Main sensors screen lets you choose the source of each of these values, and the choice is stored per vehicle.

An electric or plug-in hybrid vehicle adds the traction battery rows: Battery charge, Battery voltage, Battery current and Battery power, plus the charger's voltage, current and power on a vehicle that plugs in. Standard OBD defines none of them, so their first option is Automatic: the app looks for a manufacturer sensor and adopts the one that fits best. Battery voltage and current give the battery power, and from it the energy used, the electric consumption and the estimated range.

Two rows give the range: Fuel range on every car with an engine, and Electric range on plug-in hybrids and electric cars. Standard OBD defines neither, so when the car reports its own range, the number on the dashboard, the app adopts it, and otherwise it calculates it from the level and the consumption. The car's own range is read at most once a minute, which is enough for a number that changes slowly. On a plug-in hybrid the range on the Home screen adds the two up. On a plug-in hybrid, the Dashboard charge row reads the battery charge as the dashboard shows it, at 0 % where the car itself counts the battery as empty. When the car does not report it, the app estimates it from the reserve the car keeps at the bottom of the battery, learned when the engine takes over at the end of the battery. The calculated electric range follows that charge and the charge the car spends per kilometre on electricity, so it reaches 0 when the engine takes over.

Each vehicle only shows the rows that apply to it: an electric car has no fuel level or engine RPM, a combustion car has no battery rows. The Speed row is always there, because the phone's GPS is a backup source for it. The Odometer row is the app's base: when no sensor answers, it shows Estimated from your records and trips, the same value as the vehicle card, built from the last odometer you or a sensor recorded plus the trips since.

On a car with an engine, two more rows feed the consumption calculations of Corrections: Injected quantity and Injection time. Standard OBD defines neither; some manufacturer profiles report them, the injected quantity mostly on diesel engines.

  1. Choose the vehicle

    With more than one car registered, the picker at the top decides which vehicle's sources are shown.

  2. Change the source of a sensor

    Each row shows one of the main sensors, such as Odometer source, Speed source, Ethanol source or Fuel rate source, with the current source and an explanation of when to change it. Tap the row to open the list of candidate sensors, marked as standard, advanced or calculated, choose one and tap Save.

    When every value uses the standard sensor, the screen says so and there is nothing to change. A source that does not answer while the car is connected is set aside for that drive and the next candidate takes over; if your own choice stops answering, the row says so and shows what is in use, and your choice comes back when it answers again. A row with nothing that answers says No source responds on this vehicle.

    The list only shows sources this car has answered, plus the one in use. If you pick a sensor that stopped answering, a warning explains what to do, and your choice is kept.

  3. When an option is missing or a sensor does not answer

    The notice at the top of the screen says what to do next. If the car has never been checked, connect the app to the car with the adapter so it can check which sensors the car answers; until then, some sources use the estimate. If a row shows only one option, connect the app to your car, use Discover advanced sensors and then come back to this screen.

    If a sensor you chose stops answering, connect the app to your car, wait a few seconds for the sensor check to finish, then come back here.

  4. Fix a stuck fuel level

    When the level sensor keeps reporting the same value while fuel has been used, the screen shows the Fuel level may be stuck warning, with the reported value and the level the app estimates. Use the estimate changes the source to the estimated level; Dismiss keeps the sensor.


← All guidesIn the FAQ: Vehicles, profiles and sensors →